Hot welding machine Type PY-MAX
Layout
Technical Specification
設備尺寸/Dimension:
l 長X寬X高/LxWxH：2900 x 2600 x 2200 mm
l 重量/Weight:3000 kg
設備參數/Dimensions masks:
l 動、定模最大間距 /Min Fixed all along: 300~1300mm
l 正常合模力 /Nominal force closing : 10,000 N
l 最大合模力 /Max strength instant off: 20,000 N
l 合模重復精度/Positioning accuracy ：±0.05mm
l 功率/Max power installed with mirror: 16 KW (8Kw without hot plate)
加熱板/Hot Plate
l 最大容許長度、寬度/Max dimensions : 800x800x40mm
l 重量/ Max weight ： 100Kg/MAX
l 重復精度/Positioning accuracy ： ±0.1mm
l 溫度/Temperature setting range： 0-350°
l 溫度精度/ Temperature precision： 0-15°
l 偏斜角度/Inclination： ±15°
Calibration Software/ Application Industry
l This type of welding machine is able to weld any type of tank, but is designed for the welding of large tanks.
l The two slides are driven by two brush-less motors mounted on board with the system toothed wheel and rack with teeth inclined.
l The movement of the hot plate is obtained with a brush-less motor that drives the carriage through a synchronous toothed belt.
l The hot plate also has a controlled movement for the tilt (+/- 15 °).
l When the hot plate is in the fusion position can tilt slightly to adjust to the contemporary thrust of the two welding parts.
l The machine has a quick change system of the hot plate.
l The temperature control system integrates a control of the heating power.
l Adopting Siemens Operation System, this machine owns advantages of convenient PLC Operation and high automaticity
